How To Make A Wooden Fingerboard
+3
Miguel Nunez
Christopher Matthew
Elijah S.
7 posters
Page 1 of 1
How To Make A Wooden Fingerboard
1.The supplies you will need are veneer i prefer using rockler veener,Wood Glue,Cutting Board,4 Tech Decks,2 Spring Clamps,2 normal clamps,Drill,1/16th drill bit,1/8th drill bit,Scissors/Razorblade,Clearcoat,Sandpaper,pencil,Dremel,and Grinding Tool For it
2.Get your veener and cut 4 or 5 pieces as big as you want but not to big.
3.Get your wood glue and put it on the cutting board and put all of it on the plies make sure when you put it on make sure that they are straight not crooked.
4.Get your 4 tech decks and put 2 on top of eachother and put them on the veener/plies.
5.Next put the 2 spring clamps in the midlle of the tech decks and then the 2 normal clamps on the kicks
6.Let the glue dry for the rest of the day or 17 hours.
7.Once you take it out tthe 2 bottom tech decks off and one top one.
8.Take your pencil and draw around the tech deck.
9.Than get your dremel and get the grinding tool and go around the pencil marks to make the shape.
10.Take yor sandpaper and get rid of all the excess glue off and mold marks you have to press hard on the sand paper to get rid off them and go around the edges to make them smooth and even.
11.Take your drill and 1/16th inch drill bitand put a tech deck on the deck and put 2 spring clamps in the middle so they dont move and drill the holes all the way through.
12.Now this is the part that is the hardest get your 1/8th drill bit and go half way through the holes for countersinks.
13.Then drill the kingpin holes on the bottom of the deck where the bottom holes are dont go all the way through
14.you might want to take your sandpaper and sand over the holes and kingpin holes so there arent any little pieces of wood sticking out.
15.Next get the clearcoat and spray over the deck dont put to much then it will start to make air bubbles and make it soggy.
16.This you should do is take a tack and poke through the holes because there might be clearcoat in them
17.Enjoy and SESH
I hoped this helped you HAVE FUN
2.Get your veener and cut 4 or 5 pieces as big as you want but not to big.
3.Get your wood glue and put it on the cutting board and put all of it on the plies make sure when you put it on make sure that they are straight not crooked.
4.Get your 4 tech decks and put 2 on top of eachother and put them on the veener/plies.
5.Next put the 2 spring clamps in the midlle of the tech decks and then the 2 normal clamps on the kicks
6.Let the glue dry for the rest of the day or 17 hours.
7.Once you take it out tthe 2 bottom tech decks off and one top one.
8.Take your pencil and draw around the tech deck.
9.Than get your dremel and get the grinding tool and go around the pencil marks to make the shape.
10.Take yor sandpaper and get rid of all the excess glue off and mold marks you have to press hard on the sand paper to get rid off them and go around the edges to make them smooth and even.
11.Take your drill and 1/16th inch drill bitand put a tech deck on the deck and put 2 spring clamps in the middle so they dont move and drill the holes all the way through.
12.Now this is the part that is the hardest get your 1/8th drill bit and go half way through the holes for countersinks.
13.Then drill the kingpin holes on the bottom of the deck where the bottom holes are dont go all the way through
14.you might want to take your sandpaper and sand over the holes and kingpin holes so there arent any little pieces of wood sticking out.
15.Next get the clearcoat and spray over the deck dont put to much then it will start to make air bubbles and make it soggy.
16.This you should do is take a tack and poke through the holes because there might be clearcoat in them
17.Enjoy and SESH
I hoped this helped you HAVE FUN
Re: How To Make A Wooden Fingerboard
this is 50% of the time gonna be warped. no offence.
just make a bondo mold. i might make a tut later.
just make a bondo mold. i might make a tut later.
Guest- Guest
Re: How To Make A Wooden Fingerboard
i just freaking try to help people it doesnt have to be perfectBen K. wrote:this is 50% of the time gonna be warped. no offence.
just make a bondo mold. i might make a tut later.
Re: How To Make A Wooden Fingerboard
Elijah S. wrote:i just freaking try to help people it doesnt have to be perfectBen K. wrote:this is 50% of the time gonna be warped. no offence.
just make a bondo mold. i might make a tut later.
wtf. i wasnt being mean. i was stating a fact. im just telling people that when you make it with techdecks its bnot gonna come out perfect because fucking plastic bends.
Guest- Guest
Re: How To Make A Wooden Fingerboard
sorry i just got mad 4 no reason sorry ben i thought about making a bondo 1 it would be great if u did make a tut no hard feelings lol
Re: How To Make A Wooden Fingerboard
nice tut and all but where do i buy veneer i know it sounds newbie but they dont sell it anywhere i go
Re: How To Make A Wooden Fingerboard
www.rockler.comMiguel Nunez wrote: nice tut and all but where do i buy veneer i know it sounds newbie but they dont sell it anywhere i go
Re: How To Make A Wooden Fingerboard
:l no offense but locally thanks for the site thoI LOVE2 FB wrote:www.rockler.comMiguel Nunez wrote: nice tut and all but where do i buy veneer i know it sounds newbie but they dont sell it anywhere i go
Re: How To Make A Wooden Fingerboard
normally places like lowes homedepot stores dont have them but rockler is the place that has it its kinda cheap tooMiguel Nunez wrote::l no offense but locally thanks for the site thoI LOVE2 FB wrote:www.rockler.comMiguel Nunez wrote: nice tut and all but where do i buy veneer i know it sounds newbie but they dont sell it anywhere i go
mitja- Fingerboarder
- Posts : 93
Join date : 2009-07-20
Age : 29
Location : ravne na koroškem
Re: How To Make A Wooden Fingerboard
i make my mold out of different materials like in mine theres like 3-4 materials
Similar topics
» "WHERE CAN I BUY A WOODEN FINGERBOARD?"
» #1 NEWEST FINGERBOARD EVENT fingerboard city
» #1 newest fingerboard event fingerboard city
» tech deck wooden
» Wooden Collector Series
» #1 NEWEST FINGERBOARD EVENT fingerboard city
» #1 newest fingerboard event fingerboard city
» tech deck wooden
» Wooden Collector Series
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|